INA ZKLN3062-2RS-2AP-XL bearings
Axial angular contact ball bearings ZKLN..-2RS-2AP-XL, matched pair, double direction, lip seals on both sides
- Measurement system
- Metric
- Bore diameter
- 30.000 mm
- Outside diameter
- 62.000 mm
- Height
- 56.000 mm
- Ca
- 52000 N
- C0a
- 127000 N
- Limiting speed
- 5000 r/min
- Net weight
- 0.799 kg
- Number of rows
- 4
- Contact angle deg
- 60
- Sealing
- Contact seal on both sides
- Cage
- Plastic
- Arrangement
- Matched pair
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Special
- Lubricant in bearing
- Grease
- Relubrication feature
- With
In stock
Technical specification for INA ZKLN3062-2RS-2AP-XL
| Part Number | ZKLN3062-2RS-2AP-XL | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 30 mm | Bore diameter |
| 0 mm | Bore diameter upper tolerance | |
| -0.005 mm | Bore diameter lower tolerance | |
| D | 62 mm | Outside diameter |
| 0 mm | Outside diameter upper tolerance | |
| -0.01 mm | Outside diameter lower tolerance | |
| B | 56 mm | Width |
| 0 mm | Width upper tolerance | |
| -0.5 mm | Width lower tolerance | |
| Ca | 52000 N | Basic dynamic load rating, axial |
| C0a | 127000 N | Basic static load rating, axial |
| Cua | 7700 N | Fatigue load limit, axial |
| nG Grease | 5000 1/min | Limiting speed for grease lubrication |
| n∂ | 2200 1/min | Thermally safe operating speed |
| MR | 0.75 Nm | Bearing frictional torque |
| m | ≈ 0.799 kg | Weight |
| Mounting dimensions | ||
| Da max | 53 mm | Maximum diameter of housing |
| da min | 40 mm | Minimum diameter shaft |
| Dimensions | ||
| rmin | 0.3 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| d1 | 45.5 mm | Rib diameter inner ring |
| α | 60° | Contact angle |
| Additional information | ||
| CaL | 1500 N/µm | Rigidity axial |
| CkL | 620 Nm/mrad | Tilting rigidity |
| Mm | 1.46 kg*cm2 | Mass moment of inertia |
| 2.5 µm | Axial runout | |
| ZMA30/52 | Recommended INA precision locknut for radial locking | |
| MA | 32 Nm | Tightening torque for the recommended INA precision locknut |
| 9947 N | Required locknut force axial | |
INA ZKLN3062-2RS-2AP-XL - Axial angular contact ball bearings ZKLN..-2RS-2AP-XL, matched pair, double direction, lip seals on both sides.
ZKLN3062-2RS-2AP-XL INA angular contact ball bearings is in the X-life design. As a result of increased raceway accuracy and raceway quality, there is a significant reduction in the stress conditions present on the rolling elements and raceways under the same load, compared to the standard bearings.
- Log in to post comments
Related products
INA ZKLN3062-2RS-PE
Brand: INA
Axial angular contact ball bearings ZKLN..-2RS-PE, Increased tolerances, double direction, lip seals on both sides
INA ZKLN3062-2RS-XL
Brand: INA
Axial angular contact ball bearing ZKLN..-2RS-XL, double direction, no screw mounting
INA ZKLN3062-2Z-XL
Brand: INA
Axial angular contact ball bearings ZKLN..-2Z, double direction, gap seals on both sides