INA ZKLN1034-2RS-PE bearings
Axial angular contact ball bearings ZKLN..-2RS-PE, Increased tolerances, double direction, lip seals on both sides
- Measurement system
- Metric
- Bore diameter
- 10.000 mm
- Outside diameter
- 34.000 mm
- Height
- 20.000 mm
- Ca
- 13400 N
- C0a
- 18800 N
- Limiting speed
- 10900 r/min
- Net weight
- 0.098 kg
- Number of rows
- 2
- Contact angle deg
- 60
- Sealing
- Contact seal on both sides
- Cage
- Plastic
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Special
- Lubricant in bearing
- Grease
- Relubrication feature
- With
In stock
Technical specification for INA ZKLN1034-2RS-PE
| Part Number | ZKLN1034-2RS-PE | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 10 mm | Bore diameter |
| 0 mm | Bore diameter upper tolerance | |
| -0.008 mm | Bore diameter lower tolerance | |
| D | 34 mm | Outside diameter |
| 0 mm | Outside diameter upper tolerance | |
| -0.011 mm | Outside diameter lower tolerance | |
| B | 20 mm | Width |
| 0 mm | Width upper tolerance | |
| -0.25 mm | Width lower tolerance | |
| Ca | 13400 N | Basic dynamic load rating, axial |
| C0a | 18800 N | Basic static load rating, axial |
| Cua | 850 N | Fatigue load limit, axial |
| nG Grease | 10900 1/min | Limiting speed for grease lubrication |
| n∂ | 4600 1/min | Thermally safe operating speed |
| MR | 0.12 Nm | Bearing frictional torque |
| m | ≈ 0.098 kg | Weight |
| Mounting dimensions | ||
| Da max | 28 mm | Maximum diameter of housing |
| da min | 14 mm | Minimum diameter shaft |
| Dimensions | ||
| rmin | 0.3 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| d1 | 21 mm | Rib diameter inner ring |
| α | 60° | Contact angle |
| Additional information | ||
| CaL | 325 N/µm | Rigidity axial |
| CkL | 25 Nm/mrad | Tilting rigidity |
| Mm | 0.029 kg*cm2 | Mass moment of inertia |
| 5 µm | Axial runout | |
| ZM10 | Recommended INA precision locknut for radial locking | |
| MA | 6 Nm | Tightening torque for the recommended INA precision locknut |
| 4891 N | Required locknut force axial | |
INA ZKLN1034-2RS-PE - Axial angular contact ball bearings ZKLN..-2RS-PE, Increased tolerances, double direction, lip seals on both sides.
ZKLN1034-2RS-PE INA angular contact ball bearings is in the X-life design. As a result of increased raceway accuracy and raceway quality, there is a significant reduction in the stress conditions present on the rolling elements and raceways under the same load, compared to the standard bearings.
- Log in to post comments
Related products
INA ZKLN1034-2RS-XL
Brand: INA
Axial angular contact ball bearing ZKLN..-2RS-XL, double direction, no screw mounting
INA ZKLN1034-2Z-XL
Brand: INA
Axial angular contact ball bearings ZKLN..-2Z, double direction, gap seals on both sides