INA ZARF70160-L-TV bearings
ZARF70160-L-TV, Needle roller/axial cylindrical roller bearings ZARF..-L, double direction, for screw mounting, long shaft locating washer
- Bore diameter
- 70.000 mm
- Outside diameter
- 160.000 mm
- Total width
- 103.000 mm
- Cr
- 56000 N
- C0r
- 119000 N
- Ca
- 201000 N
- C0a
- 630000 N
- Limiting speed
- 2400 r/min
- Net weight
- 5.6 kg
- Measurement system
- Metric
- Sealing
- Without
- Cage
- Plastic
- Bearing material
- Steel
- Rolling material
- Steel
- Lubricant in bearing
- Without
- Relubrication feature
- With
In stock
Technical specification for INA ZARF70160-L-TV
| Part Number | ZARF70160-L-TV | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 70 mm | Bore diameter |
| D | 160 mm | Outside diameter |
| H | 103 mm | Hight |
| Ca | 201000 N | Basic dynamic load rating, axial |
| C0a | 630000 N | Basic static load rating, axial |
| Cr | 56000 N | Basic dynamic load rating, radial |
| C0r | 119000 N | Basic static load rating, radial |
| Cua | 58000 N | Fatigue load limit, axial |
| Cur | 16100 N | Fatigue load limit, radial |
| nG Oil | 2400 1/min | Limiting speed for oil lubrication |
| nG Grease | 800 1/min | Limiting speed for grease lubrication |
| MRL | 4.8 Nm | Bearing friction torque |
| m | ≈ 5.6 kg | Weight |
| Mounting dimensions | ||
| Da max | 116 mm | Maximum diameter of housing shoulder |
| da min | 98 mm | Minimum diameter shaft shoulder |
| t1 | 0.2 mm | Position bore in the housing |
| Dimensions | ||
| H1 | 72 mm | Height outer ring over wave washer |
| C | 22.5 mm | Width, outer ring |
| C1 | 12.5 mm | Distance to lubrication hole |
| D1 | 115 mm | Rip diameter shaft washer |
| D2 | 100 mm | Heeldiameter wave washer long |
| D3 | 115 mm | Outside diameter wave washer long |
| B | 17.5 mm | Width, inner ring |
| B1 | 38.5 mm | Width wave washer long |
| B2 | 18 mm | Width heel wave washer long |
| rmin | 0.3 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| d1 | 6 mm | Diameter lubrication hole |
| J | 133 mm | Pitch circle diameter (holes) |
| n | 12 | Number of screwing holes |
| n x t | 30° | Split |
| Additional information | ||
| CaL | 5800 N/µm | Rigidity axial |
| CkL | 6000 Nm/mrad | Tilting stiffness |
| Mm | 77.3 kg*cm2 | Mass moment of inertia |
| 1µm | Axial runout | |
| radial | ZMA70/110 | Recommended INA precision locknut for radial locking (not included) |
| axial | AM70 | Locknut 2 |
| MA | 330 Nm | Tightening torque nut |
| 46786 N | Preload force axial | |
| 100X120X12 | Sealing ring | |
| M10 | Screw size | |
| na | 12 | Number of screws |
| na x ta | 30° | Division (screwing holes) |
INA ZARF70160-L-TV - Needle roller/axial cylindrical roller bearings ZARF..-L, double direction, for screw mounting, long shaft locating washer.
ZARF70160-L-TV INA axial/radial roller bearings for screw drives are double direction, high precision axial cylindrical roller bearings with a radial bearing component. The inner ring, outer ring and cylindrical roller and cage assemblies are matched to each other such that the bearing is axially clearance-free after preloading by means of an INA precision locknut.
ZARF70160-L-TV INA is with fixing holes in the outer ring, which is screw mounted directly on the adjacent construction. ZARF70160-L-TV have a stepped shaft locating washer extended on one side.
- Log in to post comments
Related products
INA ZARF70160-TV
Brand: INA
ZARF70160-TV, Needle roller/axial cylindrical roller bearings ZARF, double direction, for screw mounting