INA SL045007-D-PP bearings
Cylindrical roller bearing SL04..-D-PP, full complement roller set, two-row, locating bearing, central rib on outer ring, 3 ribs on inner ring
- Measurement system
- Metric
- Bore diameter
- 35.000 mm
- Outside diameter
- 62.000 mm
- Width
- 36.000 mm
- Width, ourter ring
- 35.000 mm
- Cr
- 63000 N
- C0r
- 88000 N
- Limiting speed
- 3550 r/min
- Net weight
- 0.48 kg
- Number of rows
- 2
- Sealing
- Contact seal on both sides
- Locating feature
- Snap ring groove
- Cage
- Without
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- CN
- Lubricant in bearing
- Grease
- Relubrication feature
- With
In stock
Technical specification for INA SL045007-D-PP
| Part Number | SL045007-D-PP | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 35 mm | Bore diameter |
| D | 62 mm | Outside diameter |
| B | 36 mm | Width |
| C | 35 mm | Width, outer ring |
| Cr | 63000 N | Basic dynamic load rating, radial |
| C0r | 88000 N | Basic static load rating, radial |
| Cur | 12600 N | Fatigue load limit, radial |
| nG Grease | 3550 1/min | Limiting speed for grease lubrication |
| m | 0.48 kg | Weight |
| Mounting dimensions | ||
| Ca1 | 27 mm | Mounting dim for snap ring WRE Tolerance: 0/-0,2 |
| Ca2 | 26 mm | Mounting dim for retaining ring to DIN 471 Tol: 0/-0,2 |
| d1 | 46.5 mm | Rib diameter inner ring |
| d2 | 50 mm | Sealing diameter (rib) |
| d3 | 67 mm | Outside diameter of snap ring WRE |
| d1 min | 46.5 mm | Minimum diameter shaft shoulder |
| 30° | Chamfer angle | |
| -0.2 mm | Lower distance snap ring tolerance | |
| -0.2 mm | Lower distance retaining ring tolerance | |
| 0 mm | Upper distance snap ring tolerance | |
| 0 mm | Upper distance retaining ring tolerance | |
| 0 mm | Lower distance ring groove tolerance | |
| 0.2 mm | Upper distance ring groove tolerance | |
| Dimensions | ||
| C1 | 30.2 mm | Distance ring grooves |
| D1 | 60 mm | Diameter of groove |
| m | 2.1 mm | Width of groove |
| rmin | 0.3 mm | Minimum chamfer dimension |
| t | 0.5 mm | Chamfer width |
| X | 27.5 mm | Distance between rolling elements |
INA SL045007-D-PP - Cylindrical roller bearing SL04..-D-PP, full complement roller set, two-row, locating bearing, central rib on outer ring, 3 ribs on inner ring, type SL04.
SL045007-D-PP INA double row full complement cylindrical roller bearings are part of the group of radial roller bearings. SL045007-D-PP comprise solid outer rings without ribs, inner rings with three ribs, rib-guided rolling element sets and sealing rings. The outer rings of SL045007-D-PP have annular slots for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and held together by a sheet metal ring. They are used as locating bearings (but can support only slight axial loads) and are used in preference for the support of rope sheaves.
- Log in to post comments