INA CSXU075-2RS-HLE bearings
Four point contact bearing, Thin section bearing CSXU..-2RS, seals, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 190.500 mm
- Outside diameter
- 209.550 mm
- Width
- 12.700 mm
- Cr
- 13000 N
- C0r
- 26500 N
- Limiting speed
- 1370 r/min
- Net weight
- 450.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Contact seal on both sides
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Grease
In stock
Technical specification for INA CSXU075-2RS-HLE
| Part Number | CSXU075-2RS-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | 2RS | Contact seal on both sides |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Lubricating grease | - |
| Main Dimensions & Performance Data | ||
| d | 190.5 mm 7.5 in | Bore diameter |
| D | 209.55 mm 8.25 in | Outside diameter |
| B | 12.7 mm 0.5 in | Width |
| Cr | 13000 N | Basic dynamic load rating, radial |
| C0r | 26500 N | Basic static load rating, radial |
| nG | 1370 1/min | Limiting speed |
| m | ≈ 450.0 g | Weight |
| Dimensions | ||
| rmin | 0.38 mm | Minimum chamfer dimension |
| d1 | 197.5 mm | Shoulder diameter inner ring |
| D1 | 202.5 mm | Shoulder diameter outer ring |
| α | 30° | Shoulder diameter outer ring |
INA CSXU075-2RS-HLE, Four point contact bearing, Thin section bearing CSXU..-2RS, seals, brass sheet metal cage. The seals are made from synthetic rubber (NBR) and have a steel insert. Sealed bearings are greased. INA CSXU075-2RS-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSXU075-2RS-HLE four point contact bearings (type X) can support axial loads in both directionsas well as radial loads. As a result, they act in the same way asdouble row angular contact ball bearings.
- Log in to post comments
Related products
NTN KXJ075LL
Brand: NTN
KXJ075LL, NTN Ultra-Thin section ball bearings with double-seal, 4-point contact type
NTN KRJ075LL
Brand: NTN
KRJ075LL, NTN Ultra-Thin section ball bearings with double-seal, radial type
NSK NBX19012DD
Brand: NSK
NBX19012DD, NSK, N Series Inch Design Ball Bearings, Four-point contact type
KAYDON JU075XP0
Brand: KAYDON
JU075XP0 KAYDON, 7.5 in Bore, 8.25 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)
KAYDON JU075CP0
Brand: KAYDON
JU075CP0 KAYDON, 7.5 in Bore, 8.25 in Outside Diameter, 0.5 in Width, Radial contact ball bearing (type C)
INA CSCU075-2RS-HLE
Brand: INA
Deep groove ball bearing, Thin section bearing CSCU..-2RS, seals, brass sheet metal cage