INA CSXA060-HLE bearings

Four point contact bearing, Thin section bearing CSXA, brass sheet metal cage

Four point contact bearing, INA Thin section bearing CSXA

Measurement system: Inch
Bore diameter: 152.400 mm
Outside diameter: 165.100 mm
Width: 6.350 mm
Cr: 6500 N
C0r: 13400 N
Limiting speed: 2070 r/min
Net weight: 130.0 g
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Brass sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSXA060-HLE

INA CSXA060-HLE
Main Dimensions & Performance Data
Part Number	CSXA060-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	YH	brass sheet metal
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	152.4 mm 6 in	Bore diameter
D	165.1 mm 6.5 in	Outside diameter
B	6.35 mm 0.25 in	Width
Cr	6500 N	Basic dynamic load rating, radial
C0r	13400 N	Basic static load rating, radial
n_G	2070 1/min	Limiting speed
m	≈ 130.0 g	Weight
Dimensions
r_min	0.6 mm	Minimum chamfer dimension
d₁	157.1 mm	Shoulder diameter inner ring
D₁	160.4 mm	Shoulder diameter outer ring
α	30°	Shoulder diameter outer ring

INA CSXA060-HLE, Four point contact bearing, Thin section bearing CSXA, brass sheet metal cage. INA CSXA060-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSXA060-HLE four point contact bearings (type X) can support axial loads in both directionsas well as radial loads. As a result, they act in the same way asdouble row angular contact ball bearings.

Comments