INA CSEG120-HLE bearings
Angular contact ball bearing, Thin section bearing CSEG, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 304.800 mm
- Outside diameter
- 355.600 mm
- Width
- 25.400 mm
- Cr
- 55000 N
- C0r
- 98000 N
- Limiting speed
- 1610 r/min
- Net weight
- 4.29 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEG120-HLE
| Part Number | CSEG120-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YP | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 304.8 mm 12 in | Bore diameter |
| D | 355.6 mm 14 in | Outside diameter |
| B | 25.4 mm 1 in | Width |
| Cr | 55000 N | Basic dynamic load rating, radial |
| C0r | 98000 N | Basic static load rating, radial |
| nG | 1610 1/min | Limiting speed |
| m | ≈ 4.29 kg | Weight |
| Dimensions | ||
| rmin | 2 mm | Minimum chamfer dimension |
| d1 | 323.7 mm | Shoulder diameter inner ring |
| D1 | 336.8 mm | Shoulder diameter on outer ring wide side face |
| D2 | 342.4 mm | Shoulder diameter on outer ring small side face |
| α | 30° | Shoulder diameter outer ring |
INA CSEG120-HLE, Angular contact ball bearing, Thin section bearing CSEG, brass sheet metal cage. INA CSEG120-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEG120-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
INA CSXG120-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXG, brass sheet metal cage
NSK NBX30425
Brand: NSK
NBX30425, NSK, N Series Inch Design Ball Bearings, Four-point contact type
KAYDON KG120XP0
Brand: KAYDON
KG120XP0 KAYDON, 12.0" Bore, 14.0" Outside Diameter, 1.0" Width, Thin section four-point contact bearing
NSK NBA30425
Brand: NSK
NBA30425, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KG120AR0
Brand: KAYDON
KG120AR0 KAYDON, 12.0" Bore, 14.0" Outside Diameter, 1.0" Width, Thin section angular contact ball bearing
KAYDON KG120CP0
Brand: KAYDON
KG120CP0 KAYDON, 12.0" Bore, 14.0" Outside Diameter, 1.0" Width, Thin section radial contact ball bearing
INA CSCG120-HLE
Brand: INA
Deep groove ball bearing, Thin section bearing CSCG, brass sheet metal cage
NSK NBC30425
Brand: NSK
N Series inch design deep groove ball bearings