INA CSEG090-HLE bearings
Angular contact ball bearing, Thin section bearing CSEG, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 228.600 mm
- Outside diameter
- 279.400 mm
- Width
- 25.400 mm
- Cr
- 50000 N
- C0r
- 75000 N
- Limiting speed
- 2100 r/min
- Net weight
- 3.27 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEG090-HLE
| Part Number | CSEG090-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YP | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 228.6 mm 9 in | Bore diameter |
| D | 279.4 mm 11 in | Outside diameter |
| B | 25.4 mm 1 in | Width |
| Cr | 50000 N | Basic dynamic load rating, radial |
| C0r | 75000 N | Basic static load rating, radial |
| nG | 2100 1/min | Limiting speed |
| m | ≈ 3.27 kg | Weight |
| Dimensions | ||
| rmin | 2 mm | Minimum chamfer dimension |
| d1 | 247.5 mm | Shoulder diameter inner ring |
| D1 | 260.6 mm | Shoulder diameter on outer ring wide side face |
| D2 | 266.3 mm | Shoulder diameter on outer ring small side face |
| α | 30° | Shoulder diameter outer ring |
INA CSEG090-HLE, Angular contact ball bearing, Thin section bearing CSEG, brass sheet metal cage. INA CSEG090-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEG090-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
INA CSXG090-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXG, brass sheet metal cage
NSK NBX22825
Brand: NSK
NBX22825, NSK, N Series Inch Design Ball Bearings, Four-point contact type
KAYDON KG090XP0
Brand: KAYDON
KG090XP0 KAYDON, 9.0" Bore, 11.0" Outside Diameter, 1.0" Width, Thin section four-point contact bearing
NSK NBA22825
Brand: NSK
NBA22825, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KG090AR0
Brand: KAYDON
KG090AR0 KAYDON, 9.0" Bore, 11.0" Outside Diameter, 1.0" Width, Thin section angular contact ball bearing
KAYDON KG090CP0
Brand: KAYDON
KG090CP0 KAYDON, 9.0" Bore, 11.0" Outside Diameter, 1.0" Width, Thin section radial contact ball bearing
NSK NBC22825
Brand: NSK
N Series inch design deep groove ball bearings