INA CSEF110-HLE bearings
Angular contact ball bearing, Thin section bearing CSEF, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 279.400 mm
- Outside diameter
- 317.500 mm
- Width
- 19.050 mm
- Cr
- 34000 N
- C0r
- 64000 N
- Limiting speed
- 1810 r/min
- Net weight
- 2.15 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEF110-HLE
| Part Number | CSEF110-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YP | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 279.4 mm 11 in | Bore diameter |
| D | 317.5 mm 12.5 in | Outside diameter |
| B | 19.05 mm 0.75 in | Width |
| Cr | 34000 N | Basic dynamic load rating, radial |
| C0r | 64000 N | Basic static load rating, radial |
| nG | 1810 1/min | Limiting speed |
| m | ≈ 2.15 kg | Weight |
| Dimensions | ||
| rmin | 2 mm | Minimum chamfer dimension |
| d1 | 293.5 mm | Shoulder diameter inner ring |
| D1 | 303.4 mm | Shoulder diameter on outer ring wide side face |
| D2 | 307.5 mm | Shoulder diameter on outer ring small side face |
| α | 30° | Shoulder diameter outer ring |
INA CSEF110-HLE, Angular contact ball bearing, Thin section bearing CSEF, brass sheet metal cage. INA CSEF110-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEF110-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
INA CSXF110-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXF, brass sheet metal cage
INA CSCF110-HLE
Brand: INA
Deep groove ball bearing, Thin section bearing CSCF, brass sheet metal cage
KAYDON KF110XP0
Brand: KAYDON
Reali-Slim thin section four-point contact ball bearing, 11" ID, 12.5" OD, 0.75" Width
KAYDON KF110CP0
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing, 11" ID, 12.5" OD, 0.75" Width
KAYDON KF110AR0
Brand: KAYDON
Kaydon KF110AR0 Reali-Slim thin section angular contact ball bearing