INA CSEC060-HLE bearings
Angular contact ball bearing, Thin section bearing CSEC, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 152.400 mm
- Outside diameter
- 171.450 mm
- Width
- 9.525 mm
- Cr
- 9300 N
- C0r
- 15000 N
- Limiting speed
- 3500 r/min
- Net weight
- 290.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEC060-HLE
| Part Number | CSEC060-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YP | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 152.4 mm 6 in | Bore diameter |
| D | 171.45 mm 6.75 in | Outside diameter |
| B | 9.525 mm 0.375 in | Width |
| Cr | 9300 N | Basic dynamic load rating, radial |
| C0r | 15000 N | Basic static load rating, radial |
| nG | 3500 1/min | Limiting speed |
| m | ≈ 290.0 g | Weight |
| Dimensions | ||
| rmin | 1 mm | Minimum chamfer dimension |
| d1 | 159.4 mm | Shoulder diameter inner ring |
| D1 | 164.4 mm | Shoulder diameter on outer ring wide side face |
| D2 | 166.4 mm | Shoulder diameter on outer ring small side face |
| α | 30° | Shoulder diameter outer ring |
INA CSEC060-HLE, Angular contact ball bearing, Thin section bearing CSEC, brass sheet metal cage. INA CSEC060-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEC060-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
NSK NBX15209
Brand: NSK
NBX15209, NSK, N Series Inch Design Ball Bearings, Four-point contact type
NSK NBA15209
Brand: NSK
NBA15209, NSK, N Series Inch Design Ball Bearings, Angular contact type
INA CSCC060-HLE
Brand: INA
Deep groove ball bearing, Thin section bearing CSCC, brass sheet metal cage
KAYDON KC060XP0
Brand: KAYDON
Thin section bearing, KC series, Type X - four point
KAYDON KC060CP0
Brand: KAYDON
Thin section bearing, KC series, Type C - radial contact bearings
KAYDON KC060AR0
Brand: KAYDON
Thin section bearing, KC series, Type A – angular contact
NSK NBC15209
Brand: NSK
N Series inch design deep groove ball bearings