INA CSEB060-HLE bearings
Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 152.400 mm
- Outside diameter
- 168.275 mm
- Width
- 7.938 mm
- Cr
- 7000 N
- C0r
- 12100 N
- Limiting speed
- 3550 r/min
- Net weight
- 200.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEB060-HLE
| Part Number | CSEB060-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YP | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 152.4 mm 6 in | Bore diameter |
| D | 168.275 mm 6.625 in | Outside diameter |
| B | 7.938 mm 0.313 in | Width |
| Cr | 7000 N | Basic dynamic load rating, radial |
| C0r | 12100 N | Basic static load rating, radial |
| nG | 3550 1/min | Limiting speed |
| m | ≈ 200.0 g | Weight |
| Dimensions | ||
| rmin | 1 mm | Minimum chamfer dimension |
| d1 | 158.3 mm | Shoulder diameter inner ring |
| D1 | 162.4 mm | Shoulder diameter on outer ring wide side face |
| D2 | 164 mm | Shoulder diameter on outer ring small side face |
| α | 30° | Shoulder diameter outer ring |
INA CSEB060-HLE, Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage. INA CSEB060-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEB060-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
NSK NBX15207
Brand: NSK
NBX15207, NSK, N Series Inch Design Ball Bearings, Four-point contact type
INA CSXB060-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXB, brass sheet metal cage
INA CSCB060-HLE
Brand: INA
Deep groove ball bearing, Thin section bearing CSCB, brass sheet metal cage
NSK NBA15207
Brand: NSK
NBA15207, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KB060XP0
Brand: KAYDON
Reali-Slim open thin section ball bearing, KB series, Type X - four point contact
KAYDON KB060CP0
Brand: KAYDON
Reali-Slim open thin section ball bearing, KB series, Type C - radial contact
KAYDON KB060AR0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KB series, A-angular, 6x6.625x0.3125 inches
NSK NBC15207
Brand: NSK
N Series inch design deep groove ball bearings