INA CSEB055-HLE bearings
Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 139.700 mm
- Outside diameter
- 155.575 mm
- Width
- 7.938 mm
- Cr
- 6700 N
- C0r
- 11100 N
- Limiting speed
- 3900 r/min
- Net weight
- 190.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEB055-HLE
| Part Number | CSEB055-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YP | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 139.7 mm 5.5 in | Bore diameter |
| D | 155.575 mm 6.125 in | Outside diameter |
| B | 7.938 mm 0.313 in | Width |
| Cr | 6700 N | Basic dynamic load rating, radial |
| C0r | 11100 N | Basic static load rating, radial |
| nG | 3900 1/min | Limiting speed |
| m | ≈ 190.0 g | Weight |
| Dimensions | ||
| rmin | 1 mm | Minimum chamfer dimension |
| d1 | 145.6 mm | Shoulder diameter inner ring |
| D1 | 149.7 mm | Shoulder diameter on outer ring wide side face |
| D2 | 151.3 mm | Shoulder diameter on outer ring small side face |
| α | 30° | Shoulder diameter outer ring |
INA CSEB055-HLE, Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage. INA CSEB055-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEB055-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
NSK NBX13907
Brand: NSK
NBX13907, NSK, N Series Inch Design Ball Bearings, Four-point contact type
INA CSXB055-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXB, brass sheet metal cage
NSK NBA13907
Brand: NSK
NBA13907, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KB055XP0
Brand: KAYDON
Reali-Slim open thin section ball bearing, KB series, Type X - four point contact
KAYDON KB055CP0
Brand: KAYDON
Reali-Slim open thin section ball bearing, KB series, Type C - radial contact
KAYDON KB055AR0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KB series, A-angular, 5.5x6.125x0.3125 inches
NSK NBC13907
Brand: NSK
N Series inch design deep groove ball bearings