INA CSEA025-HLE bearings
Angular contact ball bearing, Thin section bearing CSEA, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 63.500 mm
- Outside diameter
- 76.200 mm
- Width
- 6.350 mm
- Cr
- 3550 N
- C0r
- 3800 N
- Limiting speed
- 8500 r/min
- Net weight
- 60.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEA025-HLE
| Part Number | CSEA025-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YP | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 63.5 mm 2.5 in | Bore diameter |
| D | 76.2 mm 3 in | Outside diameter |
| B | 6.35 mm 0.25 in | Width |
| Cr | 3550 N | Basic dynamic load rating, radial |
| C0r | 3800 N | Basic static load rating, radial |
| nG | 8500 1/min | Limiting speed |
| m | ≈ 60.0 g | Weight |
| Dimensions | ||
| rmin | 0.6 mm | Minimum chamfer dimension |
| d1 | 68.2 mm | Shoulder diameter inner ring |
| D1 | 71.5 mm | Shoulder diameter on outer ring wide side face |
| D2 | 72.9 mm | Shoulder diameter on outer ring small side face |
| α | 30° | Shoulder diameter outer ring |
INA CSEA025-HLE, Angular contact ball bearing, Thin section bearing CSEA, brass sheet metal cage. INA CSEA025-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEA025-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
NSK NBX6306
Brand: NSK
NBX6306, NSK, N Series Inch Design Ball Bearings, Four-point contact type
INA CSXA025-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXA, brass sheet metal cage
NSK NBA6306
Brand: NSK
NBA6306, NSK, N Series Inch Design Ball Bearings, Angular contact type
INA CSCA025-HLE
Brand: INA
Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage
NSK NBC6306
Brand: NSK
N Series inch design deep groove ball bearings
KAYDON KA025AR0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, angular contact, 2.5x3x0.25 inches
KAYDON KA025CP0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, Type C, radial contact, 2.5x3x0.25 inches
KAYDON KA025XP0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, Type X, four-point contact, 2.5x3x0.25 inches