INA CSCG180-HLE bearings
Deep groove ball bearing, Thin section bearing CSCG, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 457.200 mm
- Outside diameter
- 508.000 mm
- Width
- 25.400 mm
- Cr
- 60000 N
- C0r
- 126000 N
- Limiting speed
- 1080 r/min
- Net weight
- 6.21 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCG180-HLE
| Part Number | CSCG180-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 457.2 mm 18 in | Bore diameter |
| D | 508 mm 20 in | Outside diameter |
| B | 25.4 mm 1 in | Width |
| Cr | 60000 N | Basic dynamic load rating, radial |
| C0r | 126000 N | Basic static load rating, radial |
| nG | 1080 1/min | Limiting speed |
| m | ≈ 6.21 kg | Weight |
| Dimensions | ||
| rmin | 2 mm | Minimum chamfer dimension |
| d1 | 476.1 mm | Shoulder diameter inner ring |
| D1 | 489.2 mm | Shoulder diameter outer ring |
INA CSCG180-HLE, Deep groove ball bearing, Thin section bearing CSCG, brass sheet metal cage. INA CSCG180-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCG180-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
INA CSXG180-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXG, brass sheet metal cage
NSK NBX45725
Brand: NSK
NBX45725, NSK, N Series Inch Design Ball Bearings, Four-point contact type
KAYDON KG180XP0
Brand: KAYDON
KG180XP0 KAYDON, 18.0" Bore, 20.0" Outside Diameter, 1.0" Width, Thin section four-point contact bearing
KAYDON KG180AR0
Brand: KAYDON
KG180AR0 KAYDON, 18.0" Bore, 20.0" Outside Diameter, 1.0" Width, Thin section angular contact ball bearing
NSK NBA45725
Brand: NSK
NBA45725, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KG180CP0
Brand: KAYDON
KG180CP0 KAYDON, 18.0" Bore, 20.0" Outside Diameter, 1.0" Width, Thin section radial contact ball bearing
NSK NBC45725
Brand: NSK
N Series inch design deep groove ball bearings