INA CSCG100-HLE bearings
Deep groove ball bearing, Thin section bearing CSCG, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 254.000 mm
- Outside diameter
- 304.800 mm
- Width
- 25.400 mm
- Cr
- 52000 N
- C0r
- 71000 N
- Limiting speed
- 1890 r/min
- Net weight
- 3.58 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCG100-HLE
| Part Number | CSCG100-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 254 mm 10 in | Bore diameter |
| D | 304.8 mm 12 in | Outside diameter |
| B | 25.4 mm 1 in | Width |
| Cr | 52000 N | Basic dynamic load rating, radial |
| C0r | 71000 N | Basic static load rating, radial |
| nG | 1890 1/min | Limiting speed |
| m | ≈ 3.58 kg | Weight |
| Dimensions | ||
| rmin | 2 mm | Minimum chamfer dimension |
| d1 | 272.9 mm | Shoulder diameter inner ring |
| D1 | 286 mm | Shoulder diameter outer ring |
INA CSCG100-HLE, Deep groove ball bearing, Thin section bearing CSCG, brass sheet metal cage. INA CSCG100-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCG100-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
INA CSXG100-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXG, brass sheet metal cage
NSK NBX25425
Brand: NSK
NBX25425, NSK, N Series Inch Design Ball Bearings, Four-point contact type
INA CSEG100-HLE
Brand: INA
Angular contact ball bearing, Thin section bearing CSEG, brass sheet metal cage
KAYDON KG100XP0
Brand: KAYDON
KG100XP0 KAYDON, 10.0" Bore, 12.0" Outside Diameter, 1.0" Width, Thin section four-point contact bearing
NSK NBA25425
Brand: NSK
NBA25425, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KG100AR0
Brand: KAYDON
KG100AR0 KAYDON, 10.0" Bore, 12.0" Outside Diameter, 1.0" Width, Thin section angular contact ball bearing
KAYDON KG100CP0
Brand: KAYDON
KG100CP0 KAYDON, 10.0" Bore, 12.0" Outside Diameter, 1.0" Width, Thin section radial contact ball bearing
NSK NBC25425
Brand: NSK
N Series inch design deep groove ball bearings