INA CSCC075-HLE bearings
Deep groove ball bearing, Thin section bearing CSCC, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 190.500 mm
- Outside diameter
- 209.550 mm
- Width
- 9.525 mm
- Cr
- 9800 N
- C0r
- 15200 N
- Limiting speed
- 2800 r/min
- Net weight
- 350.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCC075-HLE
| Part Number | CSCC075-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 190.5 mm 7.5 in | Bore diameter |
| D | 209.55 mm 8.25 in | Outside diameter |
| B | 9.525 mm 0.375 in | Width |
| Cr | 9800 N | Basic dynamic load rating, radial |
| C0r | 15200 N | Basic static load rating, radial |
| nG | 2800 1/min | Limiting speed |
| m | ≈ 350.0 g | Weight |
| Dimensions | ||
| rmin | 1 mm | Minimum chamfer dimension |
| d1 | 197.5 mm | Shoulder diameter inner ring |
| D1 | 202.5 mm | Shoulder diameter outer ring |
INA CSCC075-HLE, Deep groove ball bearing, Thin section bearing CSCC, brass sheet metal cage. INA CSCC075-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCC075-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON KC075XP0
Brand: KAYDON
Thin section bearing, KC series, Type A - angular contact
KAYDON KC075CP0
Brand: KAYDON
Thin section bearing, KC series, Type C - radial contact bearings
KAYDON KC075AR0
Brand: KAYDON
Thin section bearing, KC series, Type A – angular contact