INA CSCB035-HLE bearings
Deep groove ball bearing, Thin section bearing CSCB, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 88.900 mm
- Outside diameter
- 104.775 mm
- Width
- 7.938 mm
- Cr
- 5800 N
- C0r
- 6100 N
- Limiting speed
- 6000 r/min
- Net weight
- 120.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCB035-HLE
| Part Number | CSCB035-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 88.9 mm 3.5 in | Bore diameter |
| D | 104.775 mm 4.125 in | Outside diameter |
| B | 7.938 mm 0.313 in | Width |
| Cr | 5800 N | Basic dynamic load rating, radial |
| C0r | 6100 N | Basic static load rating, radial |
| nG | 6000 1/min | Limiting speed |
| m | ≈ 120.0 g | Weight |
| Dimensions | ||
| rmin | 1 mm | Minimum chamfer dimension |
| d1 | 94.8 mm | Shoulder diameter inner ring |
| D1 | 98.9 mm | Shoulder diameter outer ring |
INA CSCB035-HLE, Deep groove ball bearing, Thin section bearing CSCB, brass sheet metal cage. INA CSCB035-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCB035-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
NSK NBX8807
Brand: NSK
NBX8807, NSK, N Series Inch Design Ball Bearings, Four-point contact type
INA CSXB035-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXB, brass sheet metal cage
INA CSEB035-HLE
Brand: INA
Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage
KAYDON KB035XP0
Brand: KAYDON
Reali-Slim open thin section ball bearing, KB series, Type X - four point contact
KAYDON KB035CP0
Brand: KAYDON
Reali-Slim open thin section ball bearing, KB series, Type C - radial contact
KAYDON KB035AR0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KB series, A-angular, 3.5 x3.625x0.3125 inches
NSK NBC8807
Brand: NSK
N Series inch design deep groove ball bearings