INA CSCA080-HLE bearings
Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 203.200 mm
- Outside diameter
- 215.900 mm
- Width
- 6.350 mm
- Cr
- 5400 N
- C0r
- 10200 N
- Limiting speed
- 2700 r/min
- Net weight
- 170.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCA080-HLE
| Part Number | CSCA080-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 203.2 mm 8 in | Bore diameter |
| D | 215.9 mm 8.5 in | Outside diameter |
| B | 6.35 mm 0.25 in | Width |
| Cr | 5400 N | Basic dynamic load rating, radial |
| C0r | 10200 N | Basic static load rating, radial |
| nG | 2700 1/min | Limiting speed |
| m | ≈ 170.0 g | Weight |
| Dimensions | ||
| rmin | 0.6 mm | Minimum chamfer dimension |
| d1 | 207.9 mm | Shoulder diameter inner ring |
| D1 | 211.2 mm | Shoulder diameter outer ring |
INA CSCA080-HLE, Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage. INA CSCA080-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCA080-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
NTN KYA080
Brand: NTN
KYA080, NTN Ultra-Thin section ball bearings, angular type
NTN KXA080
Brand: NTN
KXA080, NTN Ultra-Thin section ball bearings, 4-point contact type
NTN KRA080
Brand: NTN
KRA080, NTN Ultra-Thin section ball bearings, Radial type
KAYDON KA080XP0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, Type X -- four-point contact, 8x8.5x0.25 inches
KAYDON KA080CP0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, radial contact, 8x8.5x0.25 inches
KAYDON KA080AR0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, angular contact, 8x8.5x0.25 inches