FAG BSB2562-SU-XL-L055 bearings
BSB2562-SU-XL-L055, Axial angular contact ball bearing BSB..-SU-XL, single direction, no screw mounting
- Measurement system
- Metric
- Bore diameter
- 25.000 mm
- Outside diameter
- 62.000 mm
- Height
- 15.000 mm
- Ca
- 32000 N
- C0a
- 64000 N
- Limiting speed
- 6700 r/min
- Net weight
- 0.233 kg
- Number of rows
- 1
- Contact angle deg
- 60
- Sealing
- Without
- Cage
- Plastic
- Arrangement
- Universal bearing
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Special
- Lubricant in bearing
- Without
- Relubrication feature
- Without
In stock
Technical specification for FAG BSB2562-SU-XL-L055
| Part Number | BSB2562-SU-XL-L055 | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 25 mm | Bore diameter |
| 0 mm | Bore diameter upper tolerance | |
| -0.005 mm | Bore diameter lower tolerance | |
| D | 62 mm | Outside diameter |
| 0 mm | Outside diameter upper tolerance | |
| -0.007 mm | Outside diameter lower tolerance | |
| B | 15 mm | Width |
| 0 mm | Width upper tolerance | |
| -0.12 mm | Width lower tolerance | |
| Ca | 32000 N | Basic dynamic load rating, axial |
| C0a | 64000 N | Basic static load rating, axial |
| Cua | 3850 N | Fatigue load limit, axial |
| nG Grease | 6700 1/min | Limiting speed for grease lubrication |
| n∂ | 5400 1/min | Thermally safe operating speed |
| m | ≈ 0.233 kg | Weight |
| Mounting dimensions | ||
| Da | 54 mm | Diameter of housing |
| Da | H12 | Diameter of housing clearance |
| da | 38 mm | Diameter shaft |
| da | h12 mm | Diameter shaft clearance |
| Dimensions | ||
| rmin | 1 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| a | 39.4 mm | Distance between the apexes of the pressure cones |
| α | 60° | Contact angle |
| Additional information | ||
| MR | 0.13 Nm | Bearing frictional torque |
| CaL | 1001 N/µm | Rigidity axial |
| 2 µm | Axial runout | |
| ZMA25/45 | Recommended INA precision locknut for radial locking | |
| MA | 30 Nm | Tightening torque for the recommended INA precision locknut |
| 11810 N | Required locknut force axial | |
FAG BSB2562-SU-XL-L055 - Axial angular contact ball bearing BSB..-SU-XL, single direction, no screw mounting.
BSB2562-SU-XL-L055 FAG angular contact ball bearings for screw drives are single row precision bearings. They can support radial forces as well as axial forces in one direction. The bearing rings are matched to each other such that a defined preload is achieved when the rings are clamped in place using a precision locknut.
- Log in to post comments
Related products
FAG BSB2562-SU-XL
Brand: FAG
BSB2562-SU-XL, Axial angular contact ball bearing BSB..-SU-XL, single direction, no screw mounting
NSK 25TAC62CSUHPN7C
Brand: NSK
25TAC62CSUHPN7C, NSK, Super Precision Angular Contact Thrust Ball Bearings for Ball Screw Support