FAG NU324-E-XL-M1 bearings
Cylindrical roller bearing NU..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6, Replaces: NU324-E-M1 , NU324E.M1
- Measurement system
- Metric
- Bore diameter
- 120.000 mm
- Outside diameter
- 260.000 mm
- Width
- 55.000 mm
- Cr
- 610000 N
- C0r
- 600000 N
- Limiting speed
- 4550 r/min
- Net weight
- 15.321 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- CN
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for FAG NU324-E-XL-M1
| Part Number | NU324-E-XL-M1 | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 120 mm | Bore diameter |
| D | 260 mm | Outside diameter |
| B | 55 mm | Width |
| Cr | 610000 N | Basic dynamic load rating, radial |
| C0r | 600000 N | Basic static load rating, radial |
| Cur | 73000 N | Fatigue load limit, radial |
| nG | 4550 1/min | Limiting speed |
| nϑr | 2650 1/min | Reference speed |
| m | 15.321 kg | Weight |
| Mounting dimensions | ||
| da min | 134 mm | Minimum diameter shaft shoulder |
| da max | 151 mm | Maximum diameter of shaft shoulder |
| Da max | 246 mm | Maximum diameter of housing shoulder |
| db min | 156 mm | Minimum shaft shoulder |
| ra max | 2.5 mm | Maximum recess radius |
| ra1 max | 2.5 mm | Maximum recess radius |
| Dimensions | ||
| rmin | 3 mm | Minimum chamfer dimension |
| r1 min | 3 mm | Minimum chamfer dimension |
| s | 3.5 mm | Axial displacement |
| E | 230 mm | Raceway diameter outer ring |
| F | 154 mm | Raceway diameter inner ring |
| D1 min | 218.7 mm | Minimum rib diameter outer ring |
FAG NU324-E-XL-M1 - Cylindrical roller bearing NU..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6.
NU324-E-XL-M1 FAG have high rigidity, high radial load-carrying capacity and, due to the cage, are suitable for higher speeds than full-complement designs.
NU324-E-XL-M1 FAG have two rigid ribs on the outer ring, and have no ribs on the inner ring. As a result, axial displacements of the shaft relative to the housing are possible in both directions and within certain limits. During rotational motion, length compensation occurs without constraint in the bearing between the rollers and the raceway without ribs and is therefore practically free from friction. NU324-E-XL-M1 bearings are used as non-locating bearings - they cannot guide the shaft axially in either direction.
- Log in to post comments