FAG NJ340-E-M1-C3 bearings
Cylindrical roller bearing NJ..-E-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ, Replaces: NJ340E.M1.C3 , NJ340M.C3
- Measurement system
- Metric
- Bore diameter
- 200.000 mm
- Outside diameter
- 420.000 mm
- Width
- 80.000 mm
- Cr
- 1180000 N
- C0r
- 1520000 N
- Limiting speed
- 2410 r/min
- Net weight
- 58.0 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- C3
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for FAG NJ340-E-M1-C3
| Part Number | NJ340-E-M1-C3 | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 200 mm | Bore diameter |
| D | 420 mm | Outside diameter |
| B | 80 mm | Width |
| Cr | 1180000 N | Basic dynamic load rating, radial |
| C0r | 1520000 N | Basic static load rating, radial |
| Cur | 165000 N | Fatigue load limit, radial |
| nG | 2410 1/min | Limiting speed |
| nϑr | 1320 1/min | Reference speed |
| m | 58.0 kg | Weight |
| Mounting dimensions | ||
| da min | 220 mm | Minimum diameter shaft shoulder |
| da max | 255 mm | Maximum diameter of shaft shoulder |
| Da max | 400 mm | Maximum diameter of housing shoulder |
| dc min | 282 mm | Minimum shaft shoulder |
| ra max | 4 mm | Maximum recess radius |
| Dimensions | ||
| rmin | 5 mm | Minimum chamfer dimension |
| r1 min | 5 mm | Minimum chamfer dimension |
| s | 6.3 mm | Axial displacement |
| E | 370 mm | Raceway diameter outer ring |
| F | 258 mm | Raceway diameter inner ring |
| D1 min | 351.8 mm | Minimum rib diameter outer ring |
| d1 | 280.4 mm | Maximum rib diameter inner ring |
| Additional information | ||
| HJ340-E | L-washer | |
FAG NJ340-E-M1-C3 - Cylindrical roller bearing NJ..-E-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ.
NJ340-E-M1-C3 FAG have high rigidity, high radial load-carrying capacity and, due to the cage, are suitable for higher speeds than full-complement designs. NJ340-E-M1-C3 bearings with suffix E have a larger roller set and are thus designed for extremely high load-carrying capacity.
NJ340-E-M1-C3 FAG have two rigid ribs on the inner ring and one rigid rib on the inner ring. In NJ340-E-M1-C3 FAG bearings, axial displacements of the shaft relative to the housing are possible in one direction only.NJ340-E-M1-C3 bearings are used as semi-locating bearings, they can guide the shaft axially in one direction.
- Log in to post comments