FAG N308-E-XL-M1 bearings

Cylindrical roller bearing N3..-E-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N3

FAG N308-E-XL-M1 - Cylindrical roller bearing N3..-E-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N3.

N308-E-XL-M1 FAG have high rigidity, high radial load-carrying capacity and, due to the cage, are suitable for higher speeds than full-complement designs. N308-E-XL-M1 bearings with suffix E have a larger roller set and are thus designed for extremely high load-carrying capacity.

N308-E-XL-M1 FAG have two rigid ribs on the inner ring, while the outer ring has no ribs. Due to the absence of ribs, axial displacements of the shaft relative to the housing are possible in both directions within the bearing. N308-E-XL-M1 bearings are used as non-locating bearings, i. e. they cannot guide the shaft axially in either direction.