FAG QJ317-N2-MPA-C3 bearings
QJ317-N2-MPA-C3 Four point contact bearing, holding grooves, solid brass cage


Four point contact bearing, holding grooves, solid brass cage
Measurement system
Metric
Bore diameter
85.000 mm
Outside diameter
180.000 mm
Width
41.000 mm
Cr
248000 N
C0r
255000 N
Limiting speed
6600 r/min
Net weight
5.53 kg
Number of rows
1
Contact angle deg
35
Sealing
Without
Locating feature
Two locating slots in outer ring
Cage
Machined brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
Normal (PN)
Internal clearance
C3

In stock


Technical specification for FAG QJ317-N2-MPA-C3

FAG QJ317-N2-MPA-C3 bearing
Part NumberQJ317-N2-MPA-C3
CageMPAsolid brass cage, outer ring guided
Design, bearing outer ring N2 two retaining grooves in the outer ring on one side
Tolerance class PN Normal (PN)
Axial internal clearance C3 Group 3 (C3), bigger than CN
Main Dimensions & Performance Data
d 85 mm Bore diameter
D 180 mm Outside diameter
B 41 mm Width
Cr 248000 N Basic dynamic load rating, radial
C0r 255000 N Basic static load rating, radial
Cur 12800 N Fatigue load limit, radial
nG 6600 1/min Limiting speed
nϑr 3550 1/min Reference speed
m 5.53 kgWeight
Mounting dimensions
da min 99 mm Minimum diameter shaft shoulder
Da max 166 mm Maximum diameter of housing shoulder
ra max 2.5 mm Maximum fillet radius
Dimensions
rmin3 mmMinimum chamfer dimension
D1 148.7 mm Shoulder diameter outer ring
d1 117.9 mm Shoulder diameter inner ring
a 93 mm Distance between the apexes of the pressure cones
an 11.7 mm Hight retaining slot
bn 10.5 mm Width retaining slot
rn 2 mm Radius retaining slot
  45° Angle retaining slot
α 35° Contact angle
Four point contact bearing, holding grooves, solid brass cage

FAG QJ317-N2-MPA-C3, Four point contact bearing QJ3..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 85 x 180 x 41mm.

  • Cage: MPA, solid brass cage, outer ring guided
  • Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
  • Tolerance: PN, Normal (PN)
  • Axial internal clearance: C3, Group 3 (C3), bigger than CN

 

Comments

Related products

FAG  QJ317-N2-MPA  bearings
FAG QJ317-N2-MPA bearings

Brand: FAG
Four-point contact bearings
Dimensions: 85x 180x 41mm