FAG QJ217-XL-MPA-C3 bearings
QJ217-XL-MPA-C3 Four point contact bearing, X-life, solid brass cage
- Measurement system
- Metric
- Bore diameter
- 85.000 mm
- Outside diameter
- 150.000 mm
- Width
- 28.000 mm
- Cr
- 158000 N
- C0r
- 160000 N
- Limiting speed
- 8800 r/min
- Net weight
- 2.202 kg
- Number of rows
- 1
- Contact angle deg
- 35
- Sealing
- Without
- Cage
- Machined brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- C3
In stock
Technical specification for FAG QJ217-XL-MPA-C3
| Part Number | QJ217-XL-MPA-C3 | |
|---|---|---|
| Cage | MPA | solid brass cage, outer ring guided |
| Tolerance class | PN | Normal (PN) |
| Axial internal clearance | C3 | Group 3 (C3), bigger than CN |
| Main Dimensions & Performance Data | ||
| d | 85 mm | Bore diameter |
| D | 150 mm | Outside diameter |
| B | 28 mm | Width |
| Cr | 158000 N | Basic dynamic load rating, radial |
| C0r | 160000 N | Basic static load rating, radial |
| Cur | 11100 N | Fatigue load limit, radial |
| nG | 8800 1/min | Limiting speed |
| nϑr | 4050 1/min | Reference speed |
| m | 2.202 kg | Weight |
| Mounting dimensions | ||
| da min | 96 mm | Minimum diameter shaft shoulder |
| Da max | 139 mm | Maximum diameter of housing shoulder |
| ra max | 2 mm | Maximum fillet radius |
| Dimensions | ||
| rmin | 2 mm | Minimum chamfer dimension |
| D1 | 128.6 mm | Shoulder diameter outer ring |
| d1 | 107.6 mm | Shoulder diameter inner ring |
| a | 82 mm | Distance between the apexes of the pressure cones |
| α | 35° | Contact angle |
FAG QJ217-XL-MPA-C3, Four point contact bearing QJ2..-XL-MPA, X-life, solid brass cage, Main dimensions: 85 x 150 x 28mm.
- Cage: MPA, solid brass cage, outer ring guided
- Tolerance: PN, Normal (PN)
- Axial internal clearance: C3, Group 3 (C3), bigger than CN
- Log in to post comments
Related products
FAG QJ217-XL-MPA bearings
Brand: FAG
Four-point contact bearings
Dimensions: 85x 150x 28mm