FAG QJ211-XL-N2-MPA bearings
Four point contact bearing QJ2..-XL-N2-MPA, X-life, holding grooves, solid brass cage


Four point contact bearing, holding grooves, solid brass cage
Measurement system
Metric
Bore diameter
55.000 mm
Outside diameter
100.000 mm
Width
21.000 mm
Cr
77000 N
C0r
71000 N
Limiting speed
13600 r/min
Net weight
0.746 kg
Number of rows
1
Contact angle deg
35
Sealing
Without
Locating feature
Two locating slots in outer ring
Cage
Machined brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
Normal (PN)
Internal clearance
CN

In stock


Technical specification for FAG QJ211-XL-N2-MPA

FAG QJ211-XL-N2-MPA bearing
Part NumberQJ211-XL-N2-MPA
CageMPAsolid brass cage, outer ring guided
Design, bearing outer ring N2 two retaining grooves in the outer ring on one side
Tolerance class PN Normal (PN)
Axial internal clearance CN Group N (CN)
Main Dimensions & Performance Data
d 55 mm Bore diameter
D 100 mm Outside diameter
B 21 mm Width
Cr 77000 N Basic dynamic load rating, radial
C0r 71000 N Basic static load rating, radial
Cur 5000 N Fatigue load limit, radial
nG 13600 1/min Limiting speed
nϑr 5900 1/min Reference speed
m 0.746 kgWeight
Mounting dimensions
da min 64 mm Minimum diameter shaft shoulder
Da max 91 mm Maximum diameter of housing shoulder
ra max 1.5 mm Maximum fillet radius
Dimensions
rmin1.5 mmMinimum chamfer dimension
D1 84.7 mm Shoulder diameter outer ring
d1 70.4 mm Shoulder diameter inner ring
a 54 mm Distance between the apexes of the pressure cones
an 5 mm Hight retaining slot
bn 6.5 mm Width retaining slot
rn 0.5 mm Radius retaining slot
  45° Angle retaining slot
α 35° Contact angle
Four point contact bearing, holding grooves, solid brass cage

FAG QJ211-XL-N2-MPA, Four point contact bearing QJ2..-XL-N2-MPA, X-life, holding grooves, solid brass cage, Main dimensions: 55 x 100 x 21mm.

  • Cage: MPA, solid brass cage, outer ring guided
  • Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
  • Tolerance: PN, Normal (PN)
  • Axial internal clearance: CN, Group N (CN)

 

Comments

Related products

FAG  QJ211-XL-N2-MPA-C3  bearings
FAG QJ211-XL-N2-MPA-C3 bearings

Brand: FAG
Four-point contact bearings
Dimensions: 55x 100x 21mm

FAG  QJ211-XL-MPA  bearings
FAG QJ211-XL-MPA bearings

Brand: FAG
Four-point contact bearings
Dimensions: 55x 100x 21mm

FAG  QJ211-XL-MPA-C3  bearings
FAG QJ211-XL-MPA-C3 bearings

Brand: FAG
Four-point contact bearings
Dimensions: 55x 100x 21mm