FAG QJ210-XL-N2-MPA bearings
Four point contact bearing QJ2..-XL-N2-MPA, X-life, holding grooves, solid brass cage


Four point contact bearing, holding grooves, solid brass cage
Measurement system
Metric
Bore diameter
50.000 mm
Outside diameter
90.000 mm
Width
20.000 mm
Cr
62000 N
C0r
56000 N
Limiting speed
15200 r/min
Net weight
0.57 kg
Number of rows
1
Contact angle deg
35
Sealing
Without
Locating feature
Two locating slots in outer ring
Cage
Machined brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
Normal (PN)
Internal clearance
CN

In stock


Technical specification for FAG QJ210-XL-N2-MPA

FAG QJ210-XL-N2-MPA bearing
Part NumberQJ210-XL-N2-MPA
CageMPAsolid brass cage, outer ring guided
Design, bearing outer ring N2 two retaining grooves in the outer ring on one side
Tolerance class PN Normal (PN)
Axial internal clearance CN Group N (CN)
Main Dimensions & Performance Data
d 50 mm Bore diameter
D 90 mm Outside diameter
B 20 mm Width
Cr 62000 N Basic dynamic load rating, radial
C0r 56000 N Basic static load rating, radial
Cur 3950 N Fatigue load limit, radial
nG 15200 1/min Limiting speed
nϑr 6700 1/min Reference speed
m 0.57 kgWeight
Mounting dimensions
da min 57 mm Minimum diameter shaft shoulder
Da max 83 mm Maximum diameter of housing shoulder
ra max 1 mm Maximum fillet radius
Dimensions
rmin1.1 mmMinimum chamfer dimension
D1 76.4 mm Shoulder diameter outer ring
d1 63.7 mm Shoulder diameter inner ring
a 49 mm Distance between the apexes of the pressure cones
an 4 mm Hight retaining slot
bn 5.5 mm Width retaining slot
rn 0.5 mm Radius retaining slot
  45° Angle retaining slot
α 35° Contact angle
Four point contact bearing, holding grooves, solid brass cage

FAG QJ210-XL-N2-MPA, Four point contact bearing QJ2..-XL-N2-MPA, X-life, holding grooves, solid brass cage, Main dimensions: 50 x 90 x 20mm.

  • Cage: MPA, solid brass cage, outer ring guided
  • Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
  • Tolerance: PN, Normal (PN)
  • Axial internal clearance: CN, Group N (CN)

 

Comments

Related products

FAG  QJ210-XL-MPA  bearings
FAG QJ210-XL-MPA bearings

Brand: FAG
Four-point contact bearings
Dimensions: 50x 90x 20mm

FAG  QJ210-XL-MPA-C3  bearings
FAG QJ210-XL-MPA-C3 bearings

Brand: FAG
Four-point contact bearings
Dimensions: 50x 90x 20mm